Weifang Generator Set,Low Power Gensets,Diesel Generator Set,20Kw Diesel Generator Kaihua Diesel Generator Sets Co., Ltd. , http://www.tzdieselgenerator.com
2. It is forbidden to blow the fan against the workbench during operation to prevent the dust iron scraps from being rolled back into the guide rail, affecting the accuracy and feel of the guide rail.
3. Grinding rail guide oil should be replaced and added in time. Generally, if the oil in the oil mirror is cloudy or black, it must be replaced. The time is controlled and replaced in 3-6 months. The first three months and the next six months.
4. Grinding machine rail lubrication oil use professional lubricants, generally 32 # rail oil is appropriate.
5. Regularly check whether the steel wire of the grinding table is loose, and lock to prevent breakage or affect the accuracy of the hand.
6. Regularly clean the worktable rails to prevent the iron scraps from rubbing the rail surface, which will affect the accuracy of the rails. Clean up with a cloth that can be wiped clean with gasoline, and use a spade blade to gently remove debris that is embedded in the wear-resistant panel. The above actions should be conducted under the guidance of a professional or the master grinder manufacturer.
7. Regularly check whether the fuselage is unstable or not at work.
8. If it is a manual grinder, check the tightness of the cable regularly
9. If it is a semi-automatic grinding machine, check the grinding fluid concentration every week and replace it in time.
1. Apply the brush every day to complete the body cleanup of the grinder. It is strictly forbidden to use an air gun to blow the tabletop or guide rails directly to prevent the iron filings from entering the guide rails and affect the precision of the grinder.
February 08, 2019