Recently, Volkswagen (China) Sales Co., Ltd., FAW-Volkswagen Automotive Co., Ltd. and SAIC Volkswagen Automotive Co., Ltd. filed a recall plan with the AQSIQ according to the requirements of the Regulations on the Management of Defective Automobile Product Recall, which was decided since 2017. From the 25th of the month, the following vehicles were recalled, totaling 1,818,340 vehicles:
Our pad Printing Machine is the other kind of syringe printing machines to print on the syringe barrel. It has the characteristics of high working efficiency, low power consumption and high qualified rate. Compared to our syringe Silk Screen Printing Machine, this equipment is of higher speed, but for the design of high speed, then each size syringe will need one set pad printing machine.
Technical Parameter:
Name: Pad Printer
Dimension: 3300*2700*2100mm
Weight: 1500kg
Production Speed: 240 piece/minute
FAQ:
1. Are you a manufacturer?
Yes, we are the professional manufacturer set up in 1992, located at a beautiful town of Zhejiang Province.
2. Can you provide the oversea service?
Yes, after the machines arrive at your factory, we will arrange engineers go to install the machine and train your operators.
3. Can we visit your factory?
Of course. We highly welcome clients come to visit our factory. It will be our great honor to meet you.
4. How can you guarantee the quality?
100% qualified products before the delivery. The clients can inspect the products at our factory.
1 year warranty ( failure caused by machine quality ) from the equipment arrive at the client`s factory. Lifetime maintenance and offer for the spare parts.
Pad Printing Machine Automatic Pad Printing Machine,Syringe Pad Printing Machine,Pad Printing Equipment,Pad Printing Machine Yuhuan Zhengri Technology Co., Ltd. , http://www.syringemachine.com
(1) Volkswagen (China) Sales Co., Ltd.:
Part of the 2010-2015 Magotan travel sedan, which was produced between May 29, 2010 and January 7, 2015, totaled 18,315 vehicles;
Part of the imported 2013-2015 Magotan full-road vehicles produced during the period from July 10, 2012 to December 30, 2014, totaling 3,280 vehicles;
Part of the imported 2010 Volkswagen CC vehicles produced between June 23, 2009 and October 29, 2009, totaling 799;
(2) FAW-Volkswagen Automotive Co., Ltd.:
Some of the domestically produced 2007-2014 Magotan vehicles produced between January 31, 2007 and November 17, 2014, a total of 859,869 vehicles;
Some domestically produced 2009-2014 Volkswagen CC vehicles produced between August 7, 2009 and November 17, 2014, a total of 125,820 vehicles;
(3) SAIC Volkswagen Automotive Co., Ltd.:
Some of the 2011-2015 new Passat sedan, which was produced between January 5, 2011 and September 21, 2015, totaled 810,257 vehicles.
The fuel pump control unit of some vehicles within this recall will cause the non-load current to rise under certain load conditions, causing overheating, and the electronic components inside the control unit may be invalid due to the mechanical pressure caused by the installation position. The engine is turned off and there is a safety hazard. Volkswagen (China) Sales Co., Ltd., FAW-Volkswagen Automotive Co., Ltd. and SAIC Volkswagen Automotive Co., Ltd. will replace the improved fuel pump control unit for vehicles within the recall range to eliminate safety hazards.
The recall was carried out under the circumstances of the AQSIQ initiated defect investigation. For some time, the AQSIQ Defective Product Management Center received complaints from consumers about this issue. After receiving the complaint, the AQSIQ immediately deployed the Defective Product Management Center to conduct a defect investigation and assessment of the above issues. Affected by the investigation, Volkswagen (China) Sales Co., Ltd., FAW-Volkswagen Automotive Co., Ltd. and SAIC Volkswagen Automotive Co., Ltd. decided to take recall measures to eliminate potential safety hazards.
Volkswagen (China) Sales Co., Ltd., FAW-Volkswagen Automotive Co., Ltd., and SAIC Volkswagen Automotive Co., Ltd. will notify users through registered mail and other arrangements to arrange free maintenance. Users can learn about the recall through the Volkswagen (China) Sales Co., Ltd. customer hotline 400-188-0888, FAW-Volkswagen Automotive customer hotline 400-817-1888, and SAIC Volkswagen Automotive customer hotline 400-820-1111. details. Users can also visit the AQSIQ Defective Product Management Center website ( ) and follow the WeChat public account (AQSIQDPAC) for more information. In addition, you can also call the Quality Hotline of the Defective Product Management Center of the AQSIQ or the quality hotline of the local entry-exit inspection and quarantine institution: 12365 (switch No. 2) to reflect the problems in the implementation of the recall activity or to submit defects. 
December 21, 2019