Tof(Time-of-flight), is JRT new product, which is a single-point LiDAR sensor. With a micro size of 46x17x7mm, customers can widely use in many laser measurement solutions. The lidar Distance Sensor can measure 12m short-range. It's great for Unmanned Aerial Systems.Contact Us Now for data sheet. Supply Tof Sensor, LiDAR sensor, Time of Flight Sensor from China Manufacturer Chengdu JRT Meter Technology Co., Ltd , https://www.jrt-measure.com
With the introduction of LED explosion-proof lights, more and more manufacturers of LED explosion-proof lights, but the color of the spray will be different. There are yellow, gray, gold, gray, etc. But which of the several colors are better?
Because the two colors of gold and yellow are more effective when sprayed. If it is gray and gray, you will find that when you spray it, you always feel that it is not golden. The gray-white appearance is easily dirty. Used in the warehouse, the appearance of a month is not very good-looking. However, gold and yellow are not the same, these two kinds of dirt, if there is uneven product spray does not affect the appearance. If it is gray, you can see it. In fact, we all know that if the gray and white is a bit rough. It will show up.
So now the market is getting more and more color. But the best spray color is khaki. Each is not easy to fade. The second anti-corrosion treatment takes a long time. The golden yellow is easy to fade, affecting the appearance of the beautiful. So do not spray grayish white.
In fact, I am not entirely correct. After all, colors only represent a factory. However, there are also some manufacturers who also spray the gray appearance is also very beautiful. Mainly to see the pre-plus workers on the chapter, the company said how to identify the LED explosion-proof lights have been said. In fact, the main manufacturers to see processing. If the factory processing, after grinding, the rough hit, spray out of the color is also very beautiful. It is also very beautiful. Therefore, different manufacturers spray different colors, but as long as the post-processing. The appearance will be beautiful. After all, it is a mold developed. If you want to buy LED explosion-proof lights, please select Yueqing Yuehong Electrical Wugong Technical Parameters:
Executive Standard: GB3839 (equivalent to IEC60079, EN series standards)
Explosion-proof mark: ExdIICT6GB light source type: LED
Rated voltage: AC85∽265v (standard) DC24, AC36V
Rated power: 20W, 30W, 40, 50W, 60W, 70w, 80w, 100w, 120w
Luminous flux: ≥120Lm/w
Power Factor: 0.97 Color Rendering Index Ra ≥ 75
Color temperature: positive white light (5500-6000K)
Protection class: IP65 anti-corrosion level: WF2
LED junction temperature: <60°C
Appearance size: ¢ 325X285X201mm (type I) ¢ 250*260*160mm (type II) ¢ 206*252*160mm (type III)
Weight: 8.5KG (Type I) 4.4kg (Type II) 3.5kg (Type III) Introduction Specifications: 3/4
What kind of color is best for LED explosion-proof lights?
September 06, 2019