The rear wheel alignment and front wheel alignment are called four-wheel alignment. The installation of the steering knuckle, the steering wheel and the front axle of the tunnel cleaning truck has a certain relative position, and this type of installation with a certain relative position is called the steering wheel positioning. It can also be called front-wheel positioning. The front wheel alignment mainly includes four main contents including the front wheel toe, the kingpin caster, the front camber, and the kingpin tilt. Well, this is also true for the two steering wheels. For both rear wheels, there is also a relative position between the rear axle and the rear axle. This is called the rear wheel alignment. Now. The rear-wheel positioning includes the contents of the front toe of the rear wheel and the camber of the wheel.

When it comes to four-wheel alignment, it is of great benefit to tunnel cleaning vehicles. After the four-wheel alignment of the vehicle is completed, the tire can be maintained at a best angle. When the grip is improved, the comfort can be better protected. Then, in normal use, the new tunnel cleaning vehicle should be inspected on the four-wheel alignment after being used for three months. After that, the inspection can be postponed at 10,000 kilometers. If there is a collision after transposition, it is necessary to do four-wheel alignment.

Four-wheel positioning in the safe and normal cab of the tunnel cleaning vehicle is of great importance. After a relatively long time after the tunnel cleaning vehicle has been driven, due to various reasons, there will be parts wear acceleration, vehicle deviation, and tires. Unusual wear, heavy steering wheel, sudden increase in fuel consumption, etc. It is because of these reasons that the main factors that have caused the decline in the use performance of tunnel cleaning vehicles have been caused. If these conditions are to be eliminated one by one to ensure the stability of the vehicle, then the most effective and direct method is to do four-wheel alignment. This will not only ensure the safe and normal driving of the vehicle, but also effectively extend the The service life of the tires, but also can reduce fuel consumption. (Text / Sun Ni)

 As an ISO9001 certified Synchronous Chip Sealer manufacturer in China, we offer global customers with high quality synchronous Chip Sealer , synchronous asphalt rubber chip sealer and synchronous Fiber Chip Sealer , which are shown in above pictures.

Gaoyuan synchronous chip sealer is a type of Road Maintenance Machine primarily used for chip sealing of road surface, bridge waterproof and lower seal coat. It can perform asphalt binder spraying, fiber and aggregate spreading operations synchronously, which enables binders, fibers and aggregates come into full contact with each other, thereby achieving maximum cohesive performance.

Featuring high cohesive performance, automatic computer control, conduction oil heating, great stability and safety, our synchronous chip sealers are CCC, CE certified, and are very popular with customers from countries like Kazakhstan, Russia, Afghanistan, etc.

Apart from synchronous chip sealer, we at Gaoyuan also supply Asphalt Distributor, Micro Surfacing Paver, asphalt emulsion plant, etc., in order to satisfy all of our customers' needs. To make customers feel secure in their purchase, we offer them complete services, including product installation, maintenance, repair and staff training services. With a high production capacity, we can fill most orders within 20-30 days. OEM service is also available upon request.

2-chip-sealer_052-chip-sealer_04

Synchronous Chip Sealer

Synchronous Chip Sealer,Chip Sealer,Stone Synchronous Chip Sealer,Sprayer Synchronous Chip Sealer

Henan Gaoyuan Road Maintenance Equipment Co., Ltd. , https://www.sgroadmachinary.com