Milling machine can not be overlooked two widgets

With the rise of the health industry and the introduction of the health industry, many health-care coarse grains flour and grain shops opened up. Mills have become indispensable money-making artifacts in the stores, and they have also resulted in mixed quality of the mill cereal mill manufacturers. Many customers who need to buy a flour mill do not know how to choose, and several major components of a flour mill cannot be overlooked.

First, concentric devices

The small concentric circle device seems to be very simple, but it is the most critical part of the milling chamber of the whole mill, the service life of the dynamic grinding disc, the degree of wear of the adjustment sleeve, and the fineness of the milling powder.

Whether the moving disc and the top sheet are in a concentric circle device will directly affect the smoothness of the operation of the device, the noise during operation of the device, and the service life of the bearing placed inside the top sheet.

A tapered groove is added to the moving plate to match the taper of the top plate. When the lid is closed, the taper raised top plate on the lid will automatically enter the moving plate with the same taper. The groove, when the door cover is completely closed, the convex top plate and the groove of the moving grinding disk completely overlap. If they are not coincident, the door cover cannot be closed.

Second, anti-stealing device

To prevent the knob from moving, we drilled a small hole in the knob, built in the spring, placed a small steel ball on the spring, and exposed the steel ball about one-third. At the same time, 30 grooves are provided on the adjusting sleeve (and the knob's joint portion) so that when the top beads are placed in the grooves, the small steel balls cannot easily move around on the grooves due to the internal springs. .

The original creation of a forced concentric circle involves keeping the dices and moving abrasive discs of the whole grain mill in a high-speed operation, always maintaining the same unity of heart.

The pulverizer regulates the thickness of the pulverized flour through an adjustment knob externally placed on the door cover. When the knob is tightened, the moving disc is pushed to the static disc by the top sheet, and the gap between the two discs is reduced, thereby achieving fine pulverization. degree.

Ordinary milling machine, in the process of equipment operation, due to the dynamic grinding piece and the top piece close, when the dynamic grinding plate moves, the top piece is also running at the same time, at this time, the adjustment knob on the door cover will gradually go "Loose" causes the pressure on the top sheet against the abrasive disc to become smaller.

Source: Guangzhou Leimai Machinery Equipment Co., Ltd.