• Model NO.: 2XZ-15B
  • Structure: Rotary Vacuum Pump
  • Vacuum Degree: High Vacuum
  • Working Conditions: Dry
  • Transport Package: Neutral Wood Case
  • Origin: Zhejiang, China
  • Oil or Not: Oil
  • Exhauster Method: Entrapment Vacuum Pump
  • Work Function: Fore Pump
  • Trademark: JLZK
  • Specification: 4L/S-25L/S
Product Description
2XZ Series Vacuum Pump adopts a two-stage direct-coupling structrue,It is a basic unit used to pump the gas from a special sealed container to make the container have a certain vacuum degree.It can be used alone or as a fore pump working with booster pumps,diffusion pumps,molecular pumps and other ultra-high vacuum pumps,It's widely applied by scientific research instigugions,universities and industrial and mining enterprises in manufacture of electronics,vacuum drying,filtration,impregnation,coating,welding,metallurgy,chemical engineering,light industry,petroleum,medical treatment,pharmacy,printing and dyeing,power vacuum,semiconductors,food,atomic energy,textiles,laboratory equipment and so on.
2XZ Series Direct Drive Two-Stage Rotary Vane Vacuum Pump

Technical parameters:
Item/Model 2XZ-0.5 2XZ-1 2XZ-2 2XZ-4 2XZ-8 2XZ-15
Pumping speed(L/S) 0.5 1 2 4 8 15
Ultimate pressure≤(Pa) 6.0×10-2 6.0×10-2 6.0×10-2 6.0×10-2 6.0×10-2 6.0×10-2
Rotational speed(rpm) 1440 1440 1440 1440 1410 1420
Motor power(kw) 0.18 0.25 0.37 0.55 1.1 1.2
Inlet(outlet) Diameter(mm) ∮12 ∮12 ∮26 ∮26 ∮40 ∮40

Groove and raceway machining of bearing ring is the final processing procedure of bearing ring.The surface roughness, high quality and low noise of bearing products can be obtained by ultra-precision machining of bearing rings after fine grinding with oilstone.

It is mainly used for superfinishing the outer groove of deep groove ball bearings, angular contact ball bearings& double-row ball bearings.

 Main Structures and Features

1.Adopting SIEMENS.FANUC.MITSUBISHI full-digital servo-control system.
2.Centerless clamp, bearing support, bearing pressure on the end face of workpiece.
3.The adjustment of groove position is controlled by servomtor
4.The consumption of oilstone can be compensated automatically.
5.The oscillation frequency of oilstone and the turning speed of work can be adjusted by frequency convertor, rough or fine superfinishing converted automatically.

Bearing Ring Super Finish Machine

Super Finishing Machine,Bearing Ring Super Finish Machine,Grooves Super Finish,Bearing Super Finish Machine

Xinxiang Sunrise CNC Bearing Equipment Co., Ltd. , https://www.cncsunrise.com