In 2014, the number of LED companies reached more than 20,000, but it was reduced by 20% in just one year, and 4,000 companies withdrew from the market. In 2015, China was in a period of social transformation. The focus and difficulty increased, the boiling point and ignition point fell, and GDP growth fell below 7%, showing the lowest growth rate in 25 years. In such a large environment, the LED industry has experienced fierce competition such as overcapacity, price wars and product homogenization. The polarization in the industry is obvious: large enterprises have further expanded through mergers and acquisitions, while small and medium-sized enterprises have survived. In 2016, there was a slight sign of recovery in the LED industry, and many companies raised their prices. In March, packaging companies such as Mulinsen and Jingtai raised the price of some products. In May, the price of crystal power increased by 15% in the case of a 25% reduction in production. In August, the price of small and medium-sized products of Sanan Optoelectronics rose by 10%, and Huacan Optoelectronics also adjusted the price of products with lower profits by 5%. Mulinsen, Guoxing Optoelectronics and Xinda Optoelectronics raised the price of RGB lamp beads for display screens, with an increase of around 5%. For a time, the LED industry staged a price hike, which made people excited. Op Lighting announced its 2016 annual performance report. The company's total operating revenue in 2016 increased by 22.55% year-on-year; Foshan Lighting's 2016 revenue exceeded 3.3 billion, and net profit increased by more than 19 times. In terms of the LED industry cycle, after the deep integration of the industry in 2015 and 2016, the supply-side reform has been relatively full, and in 2017, LED will usher in a turning point. From the perspective of upstream supply of LEDs, the industry's capacity concentration has accelerated, and high industry barriers have been formed, and disordered capacity expansion has been curbed; mid-end packaging technology has been continuously innovated to reduce costs and improve efficiency; while the industry downstream is in vehicle, lighting, and small. Leading the gap between LED display and new applications such as the Internet of Things, the industry of the entire industry chain is expected to start a new round of growth. At the beginning of the 2017 New Year, with the further deepening of the supply-side reform, the supply and demand relationship of the post-tidal LED enterprises will be further improved, and the low-end backward production capacity will be further eliminated. Recently, LED companies have frequently received positive news. The OSRAM LEDvance sale case will be approved by the German government in 2017, Mulinsen plans to build a new LED lighting accessory component project, and Wanrun Technology will establish a wholly-owned subsidiary in the early stage of deep reshuffle, LED industry. The upstream (chip), midstream (package), and downstream (application) are poised for growth, and the New Year may usher in a new turning point in performance growth. Upstream: LED chip industry concentration increase higher barriers to curb production capacity expansion In 2015, LED industry chain mergers and acquisitions more than 40 cases, involving a large amount. Jinshajiang Venture Capital Group acquired Lumileds, a subsidiary of Royal Philips of the Netherlands, and acquired the acquisition of Puri, Liad, and the 1 billion acquisition of the United States. In 2016, the LED chip market was 13.9 billion yuan, up 9% year-on-year. In 2015, it was down 7% year-on-year. From the supply side, mainland companies have 13% YOY in 2016 and -2% in Taiwan, indicating that the country's productivity has increased rapidly. The localization rate was 66% in 2014, 73% in 2015, and 76% in 2016. The national production rate is always growing. In 2017, mainstream manufacturers will continue to expand production capacity, and the chip country's production rate will further increase in the future. The supply side reform of the LED industry chain has been relatively adequate. The top ten manufacturers in 2016 accounted for 77%, and the top three were Sanan (29%), Jingdian (13%) and Huacan (8%). Higher industry concentration can effectively curb capacity expansion, and enterprises have strong bargaining power and enhance professional production efficiency. At the beginning of the new year, the domestic LED chip leader Sanan Optoelectronics issued a price increase notice to the downstream, and raised the price of some products from January 10, 2017, with an increase of 8%. The price increase of Sanan Optoelectronics is partly due to cost reasons and on the other hand to market concentration. In the future, the concentration of LED chip industry is expected to continue to increase to form an oligopoly, which constitutes a strong and strong market. Four enterprises with full political power were replenished with more than 144 million New Year's coming. Four LED companies announced that they received government subsidies, and the government subsidies announced by the four companies totaled more than 140 million yuan. Among them, Yunnan Lanjing Technology Co., Ltd., a wholly-owned subsidiary of Huacan Optoelectronics Co., Ltd., has received a subsidy of 20 million yuan from the Hongta District Finance Bureau of Yuxi City; Shilan Micro Holdings Co., Ltd. Hangzhou Silan Integrated Circuit Co., Ltd. Received 60 million yuan from the 8-inch integrated circuit chip production line equipment transferred by the Finance Bureau of Hangzhou Economic and Technological Development Zone. Since 2009, a number of LED companies have received government subsidies. As of January 22, 2017, Sanan Optoelectronics has received a total subsidy of 358.5 million yuan, Huacan Optoelectronics won 222.56 million yuan, and Dehao Runda won 14 , 201,460 yuan. In fact, after a round of reshuffle, the target of government subsidies has changed: at present, only those enterprises that can become the leading enterprises are subsidized, and the subsidy has been narrowed. Some small and medium-sized enterprises are less likely to receive subsidies, and the trend of survival of the fittest Prominent. 2017 LED chips are in short supply, and the leader is stable. From a global perspective, with the completion of inventory in 16 years, 17 years of Apple led the strong demand for smart phone stocking, coupled with emerging markets such as automotive electronics and industrial terminals, chip sales continue to heat up. With the strong promotion of the national will, the mainland semiconductor industry has developed rapidly and the global production capacity has shifted to the mainland. At present, China has formed a complete IC industry chain from design, manufacturing, packaging and testing to terminals. With the support of national industrial funds and capital market platforms, it has ushered in the best development opportunities. The market characteristics of the industry in short supply in 2017 are obvious. It is expected that the bargaining power of chip companies will increase in the future, and leading enterprises will stabilize their profits, which will help boost the market concentration of the chip industry.

Protective Face Mask

1.Material:high quality 3 plys breathable face masks are made of good quality facial mask non-woven fabric,which has no pungent odor.The raw materials which are selected carefully and imported from USA will be dealt with special process.The imported original non-woolen with 450 ° c high temperature sterilization is not easy to break and tear up.All the non-woolen we used to manufacture the face mask is not only super durable and reinforcement but also ECO friendly ,biodegradable,compostable environmental-friendly,natural friendly and PLA recyclable Owing to this good quality materials.We have very high standards on controlling raw materials.Otherwise,we supply a couple of colours of non-woolen fabre,like white,blue,pimk,black,brown,yellow,and so on.We also accept customized colour. Outer layer is effective dust waterproof; Middle layer stop particles; Inner skin-friendly layer absorb the moisture from the breath, which makes it breathable and comfortable to wear. 3 ply face mask can well protect your breathing. 2.Size:Multi customized sizes are available,we accept personalized sizes.Different sizes including small,medium and large measurement which are suitable for different humen face being,like kids,adults.

3.Printing:We have the best advanced technology fully automatic printing machines which can support up to 8 colours printing.We accept customer designs and logos.Gravure printing,embossing printing,debossing printing,hot stamping,screen printing,UV printing,offset printing,flexo printing with CMYK pantone non-toxic water based ink are all available. Our printing has a pretty good quality as the printing of the designs is not only more durable,sun proof,weather proof but also beautiful and bright,which absorbs ink well and is stable not easy to tide the color.We aslo supply plain masks, which are perfect for craft and DIY. Printed and embellished as you may wish. Personalize the bags to make them uniquely yours. Print your own favorist logo and use them advertisement.

4.Appication:Disposable masks for protection are using for personal protection, with the metal adjustable nose clip bridge, Soft and elastic earloop provide a light weight wearing experience for you. Easy to use, cover mouth, nose and chin.Adult face masks are suitable for office, home, salon, cycling, grocery store and simply general public. It`s a good mask to wear it when you travel through malls, party and busy city streets. keep you from dust, PM 2.5, haze, smoke, automobile exhaust, etc.Kid face mask is suitable and convenient for kids to go to the kindgarton and school everyday.It`s enough to meet your family ,staff ,friends' demands.

5.Quatity inspection systerm : One of the reasons for our good Quality is that inspection system is best of its kind. We're proud of our quality control system. Our standards are very high. we put great stress on quality of products.Almost every process is computerized.. All products have to pass strict inspection before they go out. I believe the quality is soul of an enterprise. So we won't sacrifice the quality for quick profit.All of our products are suitable for the world market. Our products has always come up to international standards. We have trained analysts to do quality analysis of each process when we make the product.We also provide quality analysis training as part of training for new workers plus a week of futher training every year. So our products are well known for their fine quality. All the paper bag are received a warm welcome in the world market wherever they go.Our clients are all satisfied with them.

6.Sample:We offer free samples between three and five days, but excluding complicate condition upon customer`s requirnments.For instance, we charge you like 50 dollars for samples,but we will refund you after placing an order.The expenses of samples delivery can be nagotiated.

7.Our factory: Jinan Xin Shun Yuan Packing Co., Ltd is located in Ningjiabu Industrial Park,Zhangqiu district, Jinan city, Shandong province, China.It originated in Shandong Printing Factory (founded in 1994).It is professional manufacture of new environmental-friendly packing bag based printing processing enterprise with more than 12 years of experience in production and management.Recent years, our scale is expanding. Covering an area of about 2 million square meters. And also expand our equipment, like unit type flexo printing machines, satellite adagio printing machines, lamination type flexo printing machines, gravureprinting , dry laminating machines, automatic square bottom paper bag machines, food paper bag machines, automatic control stick bag machines, trilateral, edges the closure, self-reliance paper bag machines, CNC cutting machines.We have 8 sets flexo printing machines, 1 set Gravure printing machine;12 sets Paper bag machines ; 5 sets cutting machines, tin tie machines;30 sets heat sealing machines ; 3 sets glue coating machines , etc. We have150 staff menbers,18 management staff ,12 salesmen and 120 workers. We have ISO9001, FSC certificates.

8.Packing & Shipment:Standard export packing, 250PCS or 500PCS each carton. We try our best to make sure the packing is seaworth and strong enough to stand the rough handling in a long distance shipment .In order to ensure the packing is moisture resistance,water proof,weather proof etc.The packing corrugated cartons therefore are lined with plastic bag from inside and strengthened double solid plastic straps.We have rich experience on packing.We normally do not only provide air transportment and sea transportment but also multi modal combined transportments,which is up to customer`s requirements.

9.Payment methord: L/C,D/A,D/P,T/T,Western Union,MoneyGram Paypal payments.

10.Our service:we are in 24/7 service,we are responsibilable for replacing the defect products.Feel free to talk to us.

Disposable Face Mask,Disposable Protective Face Mask,Cost Price Disposable Face Mask,Face Mask

JINAN XINSHUNYUAN PACKING CO., LTD , https://www.xsy-packaging.com