About the brake system of the car 5 common sense

In the most recent year, the words “cannot stop at all” hovered over every corner of the Internet, but it may not be suitable for braking systems in cars. The service brake system is a system that ensures that a car can be decelerated or even stopped at any time according to the wishes of the driver.

Below, look at the summary of five common knowledge about car brake systems that must be known:

1. The ABS warning light of the instrument is on. Please check and deal with the 4S shop as soon as possible to avoid affecting the safety and delay of the trip.

2. Release the brakes after the start and hear that there is friction between the brake pads and the brake disc. This is normal.

After the engine is started, the driver will step on the brakes to perform the in-gear operation. After the gear is engaged, the brakes will be released and the vehicle will begin to run. At this time, the brake pads and brake discs have been engaged at room temperature, but they have not generated much. Friction, when the vehicle is engaged, it will produce forward or backward driving force. At this time, when the brake pedal is released, the brake pads and the brake disc will produce a sound similar to the “click”. This sound will be more pronounced if the brake disc is wet after the car wash.

In the most recent year, the words “cannot stop at all” hovered over every corner of the Internet, but it may not be suitable for braking systems in cars. The service brake system is a system that ensures that a car can be decelerated or even stopped at any time according to the wishes of the driver.

3, after the use of hand brakes for a period of time, the president of the cable: This is a normal phenomenon. The handbrake cable is composed of several sets of metal wires, and has a certain ductility after being stressed. After being used for a period of time, it will have a certain elongation compared to the length of the new car and will not have any impact on the parking brake. .

4. The brake disk is rusted: The main component of the brake disk is iron element. The vehicle will not be used for a long time and the surface of the disk will produce certain rust. However, the rust will be eliminated when the vehicle is running through the brake system. Does not affect normal use.

5, fever after the use of brake disc: normal phenomenon. The brake is achieved by friction between the brake disc and the brake pad. It is a process that converts kinetic energy into heat energy, so it generates heat. Do not touch the brake disc after parking to avoid burns.

Slip On Flange

The Slip on Flange is the flange of steel pipe with neck, which is the flange connecting steel pipe, pipe fittings and so on into the flange through fillet weld. The neck height of the flat welding flange with neck is lower, which improves the stiffness and bearing capacity of the flange.

Slip On Boss Flange,Slip On Plate Flange,Slip On Hubbed Flange,Slip On Puddle Flange

Jinan Xintai Forging Co., Ltd , https://www.xtdzflange.com