50Hz 1500RPM Googol Natural Gas Engine for Generator 160kW-1450kW


Note:
1. All engine parameters are in accordance with ISO3046, ISO8528.
2. All engine parameters are based on 25° C / 100kPa environment condition.
3. Application for Power Generation, Marine, Pump Driving, CHP power plant.


Applied gas:

Natural Gas, Biogas, City Sewage Gas, Landfill gas, Oil gas, farm biogas, Coal mine gas, etc

Acceptable fuel gas pressure: 5~12kPa

CH4 content: For natural gas≥ 85% CH4, content: For biogas≥ 40%

Gas heat value≥ 5500kcal/Nm3 (23MJ/Nm3 ). Genset output power will increase as the gas heat value increase, if use low heat value gas for fuel (Heat value<5500kcal/Nm3, it will lower the power efficiency.

Gas doesn't include free water or free materials (the size of impurities should be less than 5μ M. )

H2S content≤ 200mg/Nm³

NH3 content≤ 20mg/Nm³

Impurities content≤ 30mg/Nm³ ; Size≤ 5μ M

Water content≤ 40g/Nm³ , no free water.


Acceptable working conditions:

Ambient temperature: -10° C~+40° C

(antifreeze or preheater needed for below 0° C)

Relative humidity: <90%(20° C)

Altitude: ≤ 1000m

Normal working conditions:

Genset can run at rated power on the conditions:

Atmospheric Pressure: 100kPa, Ambient Temp: 20° C, Relative Humidity: 30%.

Standard scope of supply:
1, Gas Engine

2, AC Generator

3, Common Frame

4, Control Panel

5, Ignition System: Ignition Controller, Ignition Coils, Output harness, Pickup magnetic, Trigger disc, PolyMot high tension lead, Spark Plug

6, Detonation Controller System: DetCon20 CONTROL UNIT, Detonation SENSOR , Cable & knock sensor

7, Electronic Speed Controller System: Integrated Throttle body, Vari-Step stepper motor card, Harness VariFuel, Electronic speed controller - ECON-4, pickup magnetic

8, Gas Mixer System: VariFuel air/fuel ratio mixer, VF Flange, VariStep stepper motor card, Harness VariFuel, VariFuel2 flow body

9. Emission Control System: EmCon5 control unit, EmCon5 sensor harness, knock sensor

10, VALVE : Gas Pressure Valve, SOLENOID VALVE, Cutoff Valve

11, Exhaust Bellows & Muffler

12, Radiator for optional

Warranty:
All equipment is guaranteed for a period of 1000 hours running or 18 months from the date when the generator set has been delivered from the factory.
Engine Model   RTA780G1 RTA780G3 RTA890G1 RTA1120G1 RTA1340G1 JTA2160G1 JTA2160G3 JTA3240G3 JTA4320G1 JTA4320G3
Rating Speed  rpm 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500
Frequency  Hz 50 50 50 50 50 50 50 50 50 50
Generator Output (COP) kW 160  200  250  320  400  600  720  1024  1280  1452 
Power Factor   0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8
Gas Engine Parameter                      
Engine Output  (COP) kW 180  222  278  355  438  629  751  1069  1331  1503 
Air Ratio λ 1.65  1.7  1.7  1.7  1.7  1.67  1.7  1.7  1.65  1.7 
Configuration   6 In line 6 In line 8 Vee 10 Vee 12 Vee 8 Vee 8 Vee 12 Vee 16 Vee 16 Vee
Displacement  l 12.8 12.8 14.6 18.3 21.9 35.4 35.4 53.1 70.8 70.8
Bore  mm 128 128 128 128 128 170 170 170 170 170
Stroke  mm 166 166 142 142 142 195 195 195 195 195
Compression Ratio   11:1 11:1 12:1 12:1 12:1 12:1 12:1 12:1 12:1 12:1
PISTON Speed  m/s 8.3 8.3 7.1 7.1 7.1 9.75 9.75 9.75 9.75 9.75
Number of Flywheel Teeth    160  160  160  160  160  218  218  218  218  218 
Flywheel House Size   SAE1-14 SAE1-14 SAE1-14 SAE1-14 SAE1-14 SAE00-18 SAE00-18 SAE00-21 SAE00-21 SAE00-21
System Parameter                      
Oil Capacity  l 40 40 70 80 90 160 160 180 240 240
Max. Allowed Oil Temperature  °C 110 110 110 110 110 110 110 110 110 110
Oil Pressure Warning  kPa 200  200  200  200  200  300  300  300  300  300 
Oil Pressure Shutdown  kPa 160  160  160  160  160  200  200  200  200  200 
Coolant Capacity for Engine  l 18 18 36 42 44 70 70 100 140 140
Max. Coolant Warning Temperature   °C 90 90 90 90 90 95 95 95 95 95
Max. Coolant Shutdown Temperature   °C 95 95 95 95 95 100 100 100 100 100
Max. Intercooler Outlet Temperature   °C 50 50 50 50 50 40.5 40.5 40.5 40.5 40.5
Flow of Coolant pump (JW) m³/h 20 20 26 26 26 48 48 48 80 80
Flow of Coolant pump (LT) m³/h 14 14 14 14 14 45 45 45 75 75
Max. Exhaust Temperature °C 500 500 500 500 500 480 480 480 480 480
Exhaust Flow kg/h 776 776 943 1232 1520 3264 3896 5523 6891 7887
Exhaust Flange Diameter  mm 1*125 1*125 2*125 2*125 2*125 1*250 1*250 1*250 1*250 1*250
Charging Alternator Capacity  A 35 35 35 35 35 55 55 55 55 55
Starting Voltage  V 24 24 24 24 24 24 24 24 24 24
Thermal Balance                      
JW Coolant Heat  ± 8% kW 99 122 142 184 220 317 372 532 678 769
CAC Intercooler Heat ± 8% kW           50 60 85 107 121
Exhaust Heat up to 120°C ± 8% kW 115 142 161 208 265 364 431 571 709 802
Energy Input  kW 462  571  679  860  1067  1531  1809  2504  3160  3559 
ELectrical Efficiency  % 34.6 35 36.8  37.2  37.5  39.2  39.8  40.9  40.5  40.8 
Mechanical Efficiency  % 37.2  37.4  39.3  39.7  39.8  41.1  41.5  42.5  42.0  42.2 
Thermal Efficiency % 46.3  46.2  44.6  45.6  45.5  44.5  44.4  44.1  43.9  44.1 
Total Efficiency % 80.9  81.2  81.4  82.8  83.0  83.7  84.2  85.0  84.4  84.9 
Gas Consumption MJ/kWh 10.40  10.29  9.78  9.68  9.60  9.18  9.05  8.80  8.89  8.82 
Generator Parameter-MECC ALTE                      
Generator Model   ECO38-3SN/4 ECO38-2LN/4 ECO38-3LN/4 ECO40-2S/4 ECO40-1L/4 ECO43-2SN/4 ECO43-1LN/4 ECO43-VL/4 ECO46-2S/4 ECO46-1L/4
Generator Prime Output kW 180 240 280 360 440 744 880 1120 1440 1680
Generator Efficiency @ 0.8PF   93.0% 93.5% 93.6% 93.7% 94.2% 95.4% 95.9% 96.2% 96.4% 96.6%
Genset Dimension                      
Length  mm 3100 3100 3300 3500 3600 4600 4600 4500 5000 5000
Width  mm 1300 1300 1500 1500 1500 2190 2190 1600 1600 1600
Height  mm 1700 1700 2000 2000 2000 2300 2300 2200 2300 2300
Genset Weight kg 2500 2500 3500 3900 4300 7350 7650 10500 13500 13500


50Hz 1500rpm Googol Natural Gas Engine for Generator 160kw-1450kw


Experience reliable and efficient power generation with our Googol Natural Gas Engine series, designed for a wide range of applications including power generation, marine, pump driving, and combined heat and power (CHP) systems. These engines are built to operate under various environmental conditions, making them ideal for both industrial and commercial use. The RTA and JTA series offer power outputs ranging from 160 kW to 1450 kW, ensuring flexibility and scalability for different energy needs. With advanced cooling options such as water-cooled and air-cooled systems, these engines maintain optimal performance even in challenging environments. They also meet international standards like ISO, CE, BV, GOST, SGS, and more, guaranteeing quality and safety. The warranty covers 1 year or 1200 working hours, and technical support is available globally through our expert engineers. Whether you're using natural gas, biogas, or other alternative fuels, this engine is engineered to deliver consistent performance and efficiency. It features a comprehensive gas train system, including ball VALVES, gas filters, regulators, and controls, ensuring safe and stable operation. Additionally, the engine meets strict NOx emission standards, with emissions below 500 mg/Nm³ at full load. The standard packaging ensures secure transportation, and the product is manufactured according to ISO3046 and ISO8528 specifications. This engine is perfect for applications where reliability and sustainability are essential.

SENSOR

Water Temperature Sensor,Water Temperature Sensor 41-6539 For Yanmar Engine,Yanmar Tk 3.74 3.95 4.82 4.86 Sensor 41-6539,Water Temperature Sensor Switch 41-6539 Yanmar

ACRO (TIANJIN) INTERNATIONAL TRADE CO., LTD , https://www.acrospareparts.com

August 24, 2025