Model NO.: MJY-WSP04
Weight: 150kg
Closed: Open
Development: Conventional
Serviceability: Common Use
Trademark: MJY
Transport Package: Carton and Paper
Specification: 18"*36"*H
Origin: China
HS Code: 9403200000

 
ISO9001:2008 certificates.
High quality steel with with black powder coating
Powder Coating Wire Rack with Wheel



Size available:
Powder Coating Wire Rack with Wheel



Accessories as below: A-B-C-D-E-F-G-H-I-J-K-L
Powder Coating Wire Rack with Wheel
Powder Coating Wire Rack with Wheel
 


Open rubber and plastic mixing is the rubber factory used to prepare plastic rubber, rubber or hot refining, a type of roller exposed rubber refining machinery. This machine is suitable for EVA,rubber,synthetic rubber,hot melt and all kinds of chemistry raw material to mix ,mediate and disperse, and then put into the mass production. It is the best choice to test, make sample and learning in school. 

16inch automatic crusher mill

Advantage

1. The roller is made of chilled casting vanadium & titanium alloy iron which is hard    and wear-resisting, the surface hardness is above 70degree, the surface coating is about 15mm.

2. Hard tooth gear reducer with well-design structure, low noise, high efficiency and long    service life.

3. Self-aligning bearing is well matching with the bearing inside leakage-proof device.  The sealers are made of high temperature,wear, oil resistance material,which have very good sealing effect.

4. All main electrics are imported, the alternating current contactor is Shilin brand. The switch and button are Taiwan Tend brand.

5. Circulating lubrication system solves the oil leakage problem. The feature of this system is easy to maintain,easy to replace.

6. This machine is installed with overload protection device which protect the machine will not broken if the machine is overload. The machine will reverse 1/3 round when press the emergency stop button,which sure the production safety.

7. The [U" shape frame is whole set casting, but other factory welded together.

8. The machine base is welded by national standard I steel.

Main parameter

Name

A  Automatic crusher mill

Front roller diameter (mm)(Smooth roller)

          400

Rear roler diameter (mm)(Groove roller)

          450

Roller length(mm)

840

Front roller speed (m/min)

12.67

Speed ratio

1:1.63

Max roller gap(mm)

10

Nip adjustment

Manual

Mixing capacity(kg)

20

Power (kw)

45-8

Motor RPM(r/min)

740

Reducer ratio

45

Reducer model

           315

Roller bearing diameter(mm)

           260

Bearing mode

          352952YA

Bearing size(mm)

        360×260×150

 

Name

B mixing mill

 (mm) Front roller diameter(smooth roller)

400

Rear roller diameter (mm)(smooth roller)

400

Roller length(mm)

840

Front roller working speed (m/min)

19.36

Speed ratio

1:1.5

Max roller gap(mm)

10

Nip adjustment

Manual

Mixing capacity(kg)

20

Power (kw)

37KW

Motor RPM(r/min)

980

Reducer ratio

45

Reducer model

315

Roller bearing diameter(mm)

260

Bearing model

352952YA

Bearing size(mm)

360×260×150

 


Mixing Mill Manchine

Mixing Mill Manchine,Open Mill,Rubber Mixing Mill,Roller Mill

SHIJIAZHUANG LONGXUAN TRADING CO., LTD , https://www.longxuanmachines.com