Model NO.: 03B
Auto: Automatic
Certificate: ISO, Ce, GB
Trademark: TJ
Transport Package: Carton, Wooden Pallet
Specification: Customizable
Origin: China
HS Code: 8483600090
Model NO.: 03B
Auto: Automatic
Certificate: ISO, Ce, GB
Trademark: TJ
Transport Package: Carton, Wooden Pallet
Specification: Customizable
Origin: China
HS Code: 8483600090

Farm Machinery Pto Drive Shaft for Agri Part
PTO shaft for all kinds of Agricultural machine and tractor.

TJ Driveline developed PTO shaft products for agriculture machinery. The main products are PTO Shaft, Yoke, Guard, Torque limiter, Tube, Cross Joint.
TJ Driveline can provide shafts for tractor output from 16HP to 100HP in 540r. P. M and all kinds of safety clutches for agricultural machines like rotary tiller, lawn mower, Hay baler, etc.


The PTO is located on tractors and other implements. It takes power from the tractor and uses it to run pieces of machinery.
The top PTO shaft runs at 1000 revolutions per minute (RPM). It is normally found on larger equipment. The shield has been removed for clarity.
The bottom PTO shaft runs at 540 RPM and can be found on many size tractors from small to large.
Quality certification:
ISO9001: 2008, CE Certificate
Quality Control
1: Guard: Undistorted in -35~50 Celsius degree
2: Yoke: Coordinate Measuring Machining
3: PTO Shaft Fatigue-testing: Continuous Jigging Motion for 70 hours under 800 N. M
4: Surface: 100% magnetic particle testing for electric soldering parts
5: Others: Rockwell hardness tester, chemical analysis, etc.
Farm Machinery Pto Drive Shaft for Agri Part
PTO shaft for all kinds of Agricultural machine and tractor.

TJ Driveline developed PTO shaft products for agriculture machinery. The main products are PTO Shaft, Yoke, Guard, Torque limiter, Tube, Cross Joint.
TJ Driveline can provide shafts for tractor output from 16HP to 100HP in 540r. P. M and all kinds of safety clutches for agricultural machines like rotary tiller, lawn mower, Hay baler, etc.


The PTO is located on tractors and other implements. It takes power from the tractor and uses it to run pieces of machinery.
The top PTO shaft runs at 1000 revolutions per minute (RPM). It is normally found on larger equipment. The shield has been removed for clarity.
The bottom PTO shaft runs at 540 RPM and can be found on many size tractors from small to large.
Quality certification:
ISO9001: 2008, CE Certificate
Quality Control
1: Guard: Undistorted in -35~50 Celsius degree
2: Yoke: Coordinate Measuring Machining
3: PTO Shaft Fatigue-testing: Continuous Jigging Motion for 70 hours under 800 N. M
4: Surface: 100% magnetic particle testing for electric soldering parts
5: Others: Rockwell hardness tester, chemical analysis, etc.

Hospital and medical consumables refers to waste bins, disposable medical syringe, medical disposable bucket and baskets, the molding material is medical grade PP, volume can be different from 1ml, 2ml, 3ml, 5ml, 10ml, 20ml, 50ml, 60ml to 100ml, and needle is 16G-27G, Needle material: stainless steel 304 and life is 5 years. Please review the following specifications in details:


Standard needle size:


Needle size


Usage:
Tear the single bag of syringe, remove the syringe with needle, remove the syringe needle protection sleeve, pull the plunger back and forth slide, tighten the injection needle, and then into the liquid, needle up, slowly push the plunger to exclude air, subcutaneous or Intramuscular injection or blood.


Storage condition:
Disposable Medical Plastic 2 ml Syringe Luer Slip store in the relative humidity not to surpass 80%, non-corrosiveness gas, cool, ventilates good, in dryly the clean room. Product sterilized by Epoxy hexylene, asepsis,non-pyrogen without unusual toxicity and hemolysis response.


Machining equipment:


Disposable Medical Plastic Syringe mould CNC


Disposable Medical Plastic Syringe mould CNC


Disposable syringe mould EDM


FAQ:


Q1: How do you control quality of Disposable syringe mould quality?

A: We use our CMM measuring equipment to inspect mould critical dimensions and mould tryout sample parts, all dimension reports will be shared with customer and discussed with customer the best solutions to solve "NG" dimensions.



Q2: What are the MOQ and leading time?

A: 200000pcs each type; leading time is within 35 days or based on your quantity;


Q3: What are the terms of payment?

A: 50% in advance by T/T; the balance 50% by T/T before shipping or again copy of B/L, L/C  are acceptable.


Q4: How to keep us away from risk?

A: Our manufacturing is with rules of CE, ISO, welcome to visit our factory, and we can send you samples before placing an order.


Medical Consumables Plastic Mould

Medical Consumables Plastic Mould,Metal Injection Molding,Medical Syringe Plastic Injection Mould,Disposable Syringe Plastic Injection Mould

Zhejiang Ceeto Molding Technology Co.,Ltd. , http://www.ceetomold.com