Model NO.: fit for all kinds excavator
Material for Hydraulic Cutter: Q345b+Nm400
Conexpo. 1 for Hydraulic Cutter: 2013 Beijing Show
Conexpo. 2 for Hydraulic Cutter: 2013 Moscow Show
Conexpo. 3 for Hydraulic Cutter: 2013 St.Paul Show in Brazil
Conexpo. 4 for Hydraulic Cutter: 2014 Las Vegas Show
Conexpo. 5 for Hydraulic Cutter: 2014 Shanghai Bauma Show
Conexpo. 6 for Hydraulic Cutter: 2014 India Show
Conexpo. 7 for Hydraulic Cutter: 2015 117th Canton Fair etc.
Trademark: SF for Hydraulic Cutter
Specification: SG+SGS+ISO9001for Hydraulic Cutter
Origin: Xuzhou, Jiangsu, China for Hydraulic Cutter
HS Code: 84314100
Model NO.: fit for all kinds excavator
Material for Hydraulic Cutter: Q345b+Nm400
Conexpo. 1 for Hydraulic Cutter: 2013 Beijing Show
Conexpo. 2 for Hydraulic Cutter: 2013 Moscow Show
Conexpo. 3 for Hydraulic Cutter: 2013 St.Paul Show in Brazil
Conexpo. 4 for Hydraulic Cutter: 2014 Las Vegas Show
Conexpo. 5 for Hydraulic Cutter: 2014 Shanghai Bauma Show
Conexpo. 6 for Hydraulic Cutter: 2014 India Show
Conexpo. 7 for Hydraulic Cutter: 2015 117th Canton Fair etc.
Trademark: SF for Hydraulic Cutter
Specification: SG+SGS+ISO9001for Hydraulic Cutter
Origin: Xuzhou, Jiangsu, China for Hydraulic Cutter
HS Code: 84314100
Hydraulic Cutter

Brand SF
Place of  Origin Xuzhou,Jiangsu,China
Model 35T
Material NM400
Pin Diameter 90mm
Bucket Ear Distance 385mm
Pin Center to Center 520mm
Opening Length 930mm
Width(from the first tooth to the third tooth) 680mm
Package Export Standard Wooden Pallet/Case
Delivery Time Usually 15workdays 
HS Code 84314100
Remark also Producing the grapple for 3-120T machine
Features
- Separating reinforcing steel bar or wire from concrete block, bending and cutting off
- Ideal for big, hard, or heavily reinforced pieces
- Suitable for both primary and secondary demolition tasks.                                                                                                                                                                  The SF Hydraulic Cutters are available in a wide-range of widths and tine configurations.                          
 1) Equipped with heavily reinforced up and down blades on the opening ,the hydraulic cutter can crush and cut at the same time,                            crushing by crushing points made of the alloy steel  and cutting off  by the blades                                                                                                                                                                                                                                                                 2) Large opening design,working easily and conveniently                                                                                                                                                                     3) Hydraulic oil cylinder is equipped with a protective cover to avoid the concrete and steel debris to splash                                                                                                                                                                                                             4) Fully mechanized work with the big oil cylinder, safety and saving time,work efficiency is two or three times than hydraulic breaker                                                                                                                                                          5) Low noise, no vibration, meeting the requirements of environmental protection, which are suitable for the city and high-tech zone demolition project.     


1. Specification for Hydraulic Cutter

1)Country of origin, design and manufacture bucket
2)High quality and competitive price
3)Good services and prompt delivery
4)Single or multiple order is accepted
5)make or design buckets by customer's requirement.
6) According to different operating conditions and customer's needs, various kinds of buckets are designed reasonably from shapes, materials, and stress features, etc.

2. Description for Hydraulic Clamp

Hydraulic cutter and the reinforcement iron is compressed. All in all such as an efficient procedure results in a considerable reductuion of costs. It means lower dumping transportation costs.

3. Application for Hydraulic Clamp

1)Tackle anything with it to break up huge chunks of material, cut reinforcing wire etc.
2)Ideal for big, tough, awkward, or heavily reinforced pieces and suitable for both primary and secondary demolition tasks.

4. Other information

(1)Product Overview
*. Apart from the Standard bucket, Rocky bucket and Heavy duty bucket, we also offer quick coupler and buckets for special purpose, such as tilting bucket, hydraulic thumb, skeleton bucket, cleaning bucket, grab bucket, shovel bucket, loader bucket etc.

(2)Fit for Excavator brands

1)CATERPILLAR(CAT303~CAT390C)
2)HITACHI (EX60~EX400, ZX35~ZX870)
3)KOMATSU (PC28UU2~PC1250)
4)HYUNDAI (R55~R515LC-9T)
5)KOBELCO (SK30~SK480/-8)
6)DAEWOO (DH35~DX300LC)
7)KATO (HD75~ DH2047)
8)CASE(CX55~CX460)
9)SUMITOMO (SH75~SH460)
10)Volvo(EC55B~V290BLC)
11)DOOSAN etc.

(3)Pls contact us and you will know more

1)Xuzhou ShenFu Construction Machinery &Equipment Co., Ltd

ADDRESS: NO. 2 Hongsheng Road, Quanshan Economic Developing Zone, Xuzhou, Jiangsu, China

2)WEBSITE: http://www.xzshenfu.com

(4)Introduction of our company
Our company (Xuzhou Shenfu Construction Machinery& Equipment Co. Ltd) is professional manufacturer in Excavator bucket, attachments and design, produce, develop, and export series of excavator buckets to about 20 countries, such as USA, Australia, Sweden etc. Our operation philosophy is that Business is based on the good faith and bright future is based on the excellent quality. We also can design the product you imagine. Our new factory was set up, covering about 33300m2.

INFORMATION OF FACTORY
Packaging & Shipping
1.We pack the bucket by pallet which is Seaworthy
2.Fast delivery time:5-7days for small quantity.and 20-30days for container quantity.
3.We have a team specialized into packing and loading container,they have rich experience,and we can load the max.quantity excavator buckets and parts,to help customer save ocean freight 
 
Company Products
We are the professional manufacturer of excavator bucket, production, developing and selling by ourselves. Mainly supply excavator standard bucket, heavy duty bucket, excavator rock bucket, and also supply quick coupler, tilt bucket, mud bucket, trapezoidal bucket, ripper bucket, s60 bucket, 2 way ditching bucket, loader bucket, hydraulic thumb, tilt rake bucket, skeleton bucket, dustpan bucket, single teeth ripper, double teeth ripper, three type ripper, grab, hydraulic grab, timber grapple, log grab, rotating grapple, vibratory compaction, snow blade, excavator compactor wheel, loader hydraulic grab, timber rotating grab, 5 teeth hydraulic grapple, crusher bucket, 360 degree rotating screen bucket, plate compactor, four in one bucket, clamshell bucket, hydraulic cutter, mini bucket and other parts.
 
Our Services
1.We provide high quality excavator attachments.
2.We choose the best material for our bucket and own experienced skills
3.We can design and make buckets according to our customer request.
4.We can also support the shipment for our customer
5.Fast delivery time and good after-sales service. 
 
Company Information
Xuzhou Shenfu Construction Machinery&Equipment Co.,Ltd located on "China Engineering Machinery City"--------Xuzhou Jiangsu province China. 
We are the professional manufacturer of Excavator Bucket, Ripper, Grapple, Quick coupler, we production, developing, and selling all by ourselves. Our products exported to Australia, New Zealand, Russia, USA, Mexico, Brazil, Peru, Chile, Ecuador, Indonesia, Vietnam, Singapore, Myanmar and so on. Our products fit for Caterpillar, Volvo, Komatsu, Hitachi, Doosan , Kobelco, Hyundai, Sumitomo, JCB, XCMG, Liugong and so on. 
 
Exhibition Show
SF bucket company have customer all over the world,we attend many exhibition home and abroad like Bauma China,Bices,M&T Expo2012Brazil,CTT Moscow2013,Conexpo Las Vegas 2014 and soon on.we will show our best to the world.we are your trusted excavator bucket manufacturer. 
 
Certifications
SF bucket have  our own factory.all the buckets are design,made and sold by ourselves,our bucket quality have got the ISO-9001-2008 certification and SGS.we can supply our products with high quality ,we are your trusted excavator bucket manufacture .
 
If you want to know more information, please send E-mail to me.


Welcome to visit our factory! Hydraulic Cutter

Brand SF
Place of  Origin Xuzhou,Jiangsu,China
Model 35T
Material NM400
Pin Diameter 90mm
Bucket Ear Distance 385mm
Pin Center to Center 520mm
Opening Length 930mm
Width(from the first tooth to the third tooth) 680mm
Package Export Standard Wooden Pallet/Case
Delivery Time Usually 15workdays 
HS Code 84314100
Remark also Producing the grapple for 3-120T machine
Features
- Separating reinforcing steel bar or wire from concrete block, bending and cutting off
- Ideal for big, hard, or heavily reinforced pieces
- Suitable for both primary and secondary demolition tasks.                                                                                                                                                                  The SF Hydraulic Cutters are available in a wide-range of widths and tine configurations.                          
 1) Equipped with heavily reinforced up and down blades on the opening ,the hydraulic cutter can crush and cut at the same time,                            crushing by crushing points made of the alloy steel  and cutting off  by the blades                                                                                                                                                                                                                                                                 2) Large opening design,working easily and conveniently                                                                                                                                                                     3) Hydraulic oil cylinder is equipped with a protective cover to avoid the concrete and steel debris to splash                                                                                                                                                                                                             4) Fully mechanized work with the big oil cylinder, safety and saving time,work efficiency is two or three times than hydraulic breaker                                                                                                                                                          5) Low noise, no vibration, meeting the requirements of environmental protection, which are suitable for the city and high-tech zone demolition project.     


1. Specification for Hydraulic Cutter

1)Country of origin, design and manufacture bucket
2)High quality and competitive price
3)Good services and prompt delivery
4)Single or multiple order is accepted
5)make or design buckets by customer's requirement.
6) According to different operating conditions and customer's needs, various kinds of buckets are designed reasonably from shapes, materials, and stress features, etc.

2. Description for Hydraulic Clamp

Hydraulic cutter and the reinforcement iron is compressed. All in all such as an efficient procedure results in a considerable reductuion of costs. It means lower dumping transportation costs.

3. Application for Hydraulic Clamp

1)Tackle anything with it to break up huge chunks of material, cut reinforcing wire etc.
2)Ideal for big, tough, awkward, or heavily reinforced pieces and suitable for both primary and secondary demolition tasks.

4. Other information

(1)Product Overview
*. Apart from the Standard bucket, Rocky bucket and Heavy duty bucket, we also offer quick coupler and buckets for special purpose, such as tilting bucket, hydraulic thumb, skeleton bucket, cleaning bucket, grab bucket, shovel bucket, loader bucket etc.

(2)Fit for Excavator brands

1)CATERPILLAR(CAT303~CAT390C)
2)HITACHI (EX60~EX400, ZX35~ZX870)
3)KOMATSU (PC28UU2~PC1250)
4)HYUNDAI (R55~R515LC-9T)
5)KOBELCO (SK30~SK480/-8)
6)DAEWOO (DH35~DX300LC)
7)KATO (HD75~ DH2047)
8)CASE(CX55~CX460)
9)SUMITOMO (SH75~SH460)
10)Volvo(EC55B~V290BLC)
11)DOOSAN etc.

(3)Pls contact us and you will know more

1)Xuzhou ShenFu Construction Machinery &Equipment Co., Ltd

ADDRESS: NO. 2 Hongsheng Road, Quanshan Economic Developing Zone, Xuzhou, Jiangsu, China

2)WEBSITE: http://www.xzshenfu.com

(4)Introduction of our company
Our company (Xuzhou Shenfu Construction Machinery& Equipment Co. Ltd) is professional manufacturer in Excavator bucket, attachments and design, produce, develop, and export series of excavator buckets to about 20 countries, such as USA, Australia, Sweden etc. Our operation philosophy is that Business is based on the good faith and bright future is based on the excellent quality. We also can design the product you imagine. Our new factory was set up, covering about 33300m2.

INFORMATION OF FACTORY
Packaging & Shipping
1.We pack the bucket by pallet which is Seaworthy
2.Fast delivery time:5-7days for small quantity.and 20-30days for container quantity.
3.We have a team specialized into packing and loading container,they have rich experience,and we can load the max.quantity excavator buckets and parts,to help customer save ocean freight 
 
Company Products
We are the professional manufacturer of excavator bucket, production, developing and selling by ourselves. Mainly supply excavator standard bucket, heavy duty bucket, excavator rock bucket, and also supply quick coupler, tilt bucket, mud bucket, trapezoidal bucket, ripper bucket, s60 bucket, 2 way ditching bucket, loader bucket, hydraulic thumb, tilt rake bucket, skeleton bucket, dustpan bucket, single teeth ripper, double teeth ripper, three type ripper, grab, hydraulic grab, timber grapple, log grab, rotating grapple, vibratory compaction, snow blade, excavator compactor wheel, loader hydraulic grab, timber rotating grab, 5 teeth hydraulic grapple, crusher bucket, 360 degree rotating screen bucket, plate compactor, four in one bucket, clamshell bucket, hydraulic cutter, mini bucket and other parts.
 
Our Services
1.We provide high quality excavator attachments.
2.We choose the best material for our bucket and own experienced skills
3.We can design and make buckets according to our customer request.
4.We can also support the shipment for our customer
5.Fast delivery time and good after-sales service. 
 
Company Information
Xuzhou Shenfu Construction Machinery&Equipment Co.,Ltd located on "China Engineering Machinery City"--------Xuzhou Jiangsu province China. 
We are the professional manufacturer of Excavator Bucket, Ripper, Grapple, Quick coupler, we production, developing, and selling all by ourselves. Our products exported to Australia, New Zealand, Russia, USA, Mexico, Brazil, Peru, Chile, Ecuador, Indonesia, Vietnam, Singapore, Myanmar and so on. Our products fit for Caterpillar, Volvo, Komatsu, Hitachi, Doosan , Kobelco, Hyundai, Sumitomo, JCB, XCMG, Liugong and so on. 
 
Exhibition Show
SF bucket company have customer all over the world,we attend many exhibition home and abroad like Bauma China,Bices,M&T Expo2012Brazil,CTT Moscow2013,Conexpo Las Vegas 2014 and soon on.we will show our best to the world.we are your trusted excavator bucket manufacturer. 
 
Certifications
SF bucket have  our own factory.all the buckets are design,made and sold by ourselves,our bucket quality have got the ISO-9001-2008 certification and SGS.we can supply our products with high quality ,we are your trusted excavator bucket manufacture .
 
If you want to know more information, please send E-mail to me.


Welcome to visit our factory!

Optical fiber laser marking machine is a new generation of laser marking machine system developed by our company using today's advanced laser technology. Fiber laser marking machine commonly used laser power: 10W, 20W, 30W, 50W. Fiber laser marking machine models are divided into desktop, rotary, portable, mini - four categories of standard models. For special marking requirements, we can provide customized services for power and models to meet users' one-stop marking requirements.
Optical fiber laser marking electromechanical optical conversion efficiency, the use of air cooling cooling, compact size, good quality output beam, high reliability. Engravable metal material and part of non-metal material, fiber laser with integrated structure, no optical pollution and power coupling and loss, air cooling, with high efficiency, long life and less maintenance performance.

Fiber Laser Marking Machines

Fiber Laser Marking Machines,Mini Fiber Laser Marking Machine,Mini Color Fiber Laser Marking Machine,Laser Engraving Marking Machine

Jinan Luyue CNC Equipment Co., Ltd. , https://www.sdlycnc.com