Model NO.: water system
Trademark: DRS
Transport Package: Portable Case
Origin: Hong Kong
Model NO.: water system
Trademark: DRS
Transport Package: Portable Case
Origin: Hong Kong
DRS Water System allows to find water up to 200meters deep. It's based on our Advanced Resistivity Scanner (ARS). This is achieved through resistivity analysis. Resistivity is an intrinsic property that quantifies how strongly a given material opposes the flow of electric current. This technique is used on construction and archeology. The ARS will send electrical current in the soil thanks to 2 or 4 probes for theorically depth up to 100 meters !  Then it will analyse the results of the bounced signal layer by layer. It will determine what is the most important component below your feet and in this case Water. It can only find water. if you look for cavities and metals you should consider learning more about ARS.
3D Underground Water Finder/Resistivity Scanner/Gold Detector/Mine Detector/Underground Metal Detector/Underground Detector/3D Detector

3D Underground Water Finder/Resistivity Scanner/Gold Detector/Mine Detector/Underground Metal Detector/Underground Detector/3D Detector3D Underground Water Finder/Resistivity Scanner/Gold Detector/Mine Detector/Underground Metal Detector/Underground Detector/3D Detector

Insert at least 2 probes half way in the ground. Place the device in the middle of the probes. The farther the probes are one from another, the deeper the scan goes. That is why the lenght of the cable matters. If you place 2 probes 6 meter far from the control box (12meters of cable), then you achieve a scanning depth up to 6 meter. You can also use 4 probes to cover more ground.  Standard Equipment includes 4 cables/probes of 25m each meaning you can reach depth up to 50 meters with 2 probes and 25 meters if you use 4 probes. You can purchase optional 4x50meter (for depth up to 100m) and 4x100meter cable for depth up to 200 meters ! Remember that ARS makes analysis of the soil layers by layers, meaning that if you can identifiy what's below your feet at a predifined depth. If you choose to scan what's at 5 meter depth, you will not see what's below or above 5 meters. To see what's at 6m depth, you have to scan the 6m layer by adjusting length of the cables.

ARS runs with 110 V high power battery, while similar devices on the market run with simple 1.5V batteries meaning they have not enough power to go much below the surface ! Therefore ARS can achieve much great depth while other devices are only able to scan the surface of the ground. You can purchase optionnal probes with extra long cable for depth up to 200 meters.

ARS send current then electronically checks ground resistivity between 2-4 probes for correct metal/mineral & treasure location, size & depth. ARS will scan lines between each probe and tell the result on the screen layers by layers of the soil. You can also see results on the provided tablet that runs our 3d custom software. If you want, you can then export the data to a PC. ARS uses different technology than scanners, GPR and metal detectors, therefore it's a perfect machine to be used in addition to them. Also take a look at our X4 and X5 that combine Radar technology with ARS in a miniaturized device.

Why buy the ARS ?

  • Find gold, silver, copper, iron as well as other metals, minerals, gold veins, cavities and water at depth up to 200 meters !
  • Read directly raw results on the screen (indicating nature of what's detected between each probe)
  • Export the scan results in our 3D software that runs on our tablet PC
  • DRS 3D custom software comes in 8 languages: english, german, arab, turkish, persian, french, italian, russian
  • Easy to use, no need for complicated settings
  • Control unit with joystick (Bluetooth technology)
  • Scan with 2 or 4 probes

ARS comes with :

  • Control unit
  • 4 probes with wires (4×25 meters)
  • Control joystick
  • Tablet PC with Windows
  • 110 V high energy battery
  • Installed DRS 3D software
  • Tablet PC Charger
  • DRS 3D custom software comes in 8 languages: english, german, arab, turkish, persian, french, italian, russian
  • Pelican case
  • 2 Year Warranty

Optional accessories :

  • 4×50 meter cable and probes for depth up to 100 meters (roller cart included)
  • 4×100 meter cable and probes for depth up to 200 meters (roller cart included
DRS Water System allows to find water up to 200meters deep. It's based on our Advanced Resistivity Scanner (ARS). This is achieved through resistivity analysis. Resistivity is an intrinsic property that quantifies how strongly a given material opposes the flow of electric current. This technique is used on construction and archeology. The ARS will send electrical current in the soil thanks to 2 or 4 probes for theorically depth up to 100 meters !  Then it will analyse the results of the bounced signal layer by layer. It will determine what is the most important component below your feet and in this case Water. It can only find water. if you look for cavities and metals you should consider learning more about ARS.
3D Underground Water Finder/Resistivity Scanner/Gold Detector/Mine Detector/Underground Metal Detector/Underground Detector/3D Detector

3D Underground Water Finder/Resistivity Scanner/Gold Detector/Mine Detector/Underground Metal Detector/Underground Detector/3D Detector3D Underground Water Finder/Resistivity Scanner/Gold Detector/Mine Detector/Underground Metal Detector/Underground Detector/3D Detector

Insert at least 2 probes half way in the ground. Place the device in the middle of the probes. The farther the probes are one from another, the deeper the scan goes. That is why the lenght of the cable matters. If you place 2 probes 6 meter far from the control box (12meters of cable), then you achieve a scanning depth up to 6 meter. You can also use 4 probes to cover more ground.  Standard Equipment includes 4 cables/probes of 25m each meaning you can reach depth up to 50 meters with 2 probes and 25 meters if you use 4 probes. You can purchase optional 4x50meter (for depth up to 100m) and 4x100meter cable for depth up to 200 meters ! Remember that ARS makes analysis of the soil layers by layers, meaning that if you can identifiy what's below your feet at a predifined depth. If you choose to scan what's at 5 meter depth, you will not see what's below or above 5 meters. To see what's at 6m depth, you have to scan the 6m layer by adjusting length of the cables.

ARS runs with 110 V high power battery, while similar devices on the market run with simple 1.5V batteries meaning they have not enough power to go much below the surface ! Therefore ARS can achieve much great depth while other devices are only able to scan the surface of the ground. You can purchase optionnal probes with extra long cable for depth up to 200 meters.

ARS send current then electronically checks ground resistivity between 2-4 probes for correct metal/mineral & treasure location, size & depth. ARS will scan lines between each probe and tell the result on the screen layers by layers of the soil. You can also see results on the provided tablet that runs our 3d custom software. If you want, you can then export the data to a PC. ARS uses different technology than scanners, GPR and metal detectors, therefore it's a perfect machine to be used in addition to them. Also take a look at our X4 and X5 that combine Radar technology with ARS in a miniaturized device.

Why buy the ARS ?

  • Find gold, silver, copper, iron as well as other metals, minerals, gold veins, cavities and water at depth up to 200 meters !
  • Read directly raw results on the screen (indicating nature of what's detected between each probe)
  • Export the scan results in our 3D software that runs on our tablet PC
  • DRS 3D custom software comes in 8 languages: english, german, arab, turkish, persian, french, italian, russian
  • Easy to use, no need for complicated settings
  • Control unit with joystick (Bluetooth technology)
  • Scan with 2 or 4 probes

ARS comes with :

  • Control unit
  • 4 probes with wires (4×25 meters)
  • Control joystick
  • Tablet PC with Windows
  • 110 V high energy battery
  • Installed DRS 3D software
  • Tablet PC Charger
  • DRS 3D custom software comes in 8 languages: english, german, arab, turkish, persian, french, italian, russian
  • Pelican case
  • 2 Year Warranty

Optional accessories :

  • 4×50 meter cable and probes for depth up to 100 meters (roller cart included)
  • 4×100 meter cable and probes for depth up to 200 meters (roller cart included

We can provide thoes kinds of the DEUTZ BFM1015 engine spare parts:

crankshaft, camshaft, con rod,

cylinder head, cylinder block, cylinder liner,

piston, piston ring,

engine valve, engine bearing,

oil nozzle, oil seal,

oil pump, fuel pump, water pump,

turbocharger, alternator, starter...

 

High standards of quality, reliable production methods, the latest equipment and qualified, committed staff ensure that tried and tested DEUTZ quality components are produced at all our sites

all parts

BFM1015 engine spare parts

Deutz Temperature Sensor,Deutz Engine Injector,Deutz Injector Nozzle,High-Pressure Oil Pipe

Shijiazhuang Houfeng Trading Co.,Ltd , http://www.hfdieselengine.com